How To Refinish Kitchen Cabinets

Having expensive cabinets hanging on your kitchen walls doesn’t mean much if you don’t like the paint. This is why many homeowners are considering updating the cabinetry with a color tone of their choice. Refinishing your kitchen cabinets is a quite messy job, and the last thing you want is to paint all over your kitchen countertops as you learn how to paint and refinish your kitchen cabinets. Eventually, it increases your work and headache because now you have to scratch paint from the countertops too. Now, does it mean you should not be doing this on your own? No! you can refinish your kitchen DIY if you do it smartly. This article will tell you how you can transform dated, worn-out cabinets into attractive new ones without ruining your kitchen walls and countertops.

First Thing First, Can You Handle This Refinish Job?

This kitchen cabinet restoration project isn’t as confusing or complicated as a complete kitchen remodel, but it is still an important task. Be prepared to devote three or four weekends, a lot of effort, and a maximum of brains. There is not a lot of woodwork involved, but you will need to plan prudently and measure precisely for the cabinet doors to look good. Painting is above all a task of determination.

Protect Your Countertops And Walls

An easy way to protect your countertops, walls, and floors is to cover them with rosin or inexpensive brown construction paper. You can find this paper anywhere at a local hardware store or at any supermarket. All you need to do is take some glue and stick this paper where a paint splash or a drop can hit. This will save you a lot of time scraping paint from walls and countertops. You can thank me later for this advice!

Now Sand And Apply The Paint After The Primer Coat

Use a wooden sanding block to avoid rounding the edges of the wood. When sanding, it is not necessary to remove all the old paint if it is strong and well adhered, just scraping the surface to give the new paint a firm and clean base for better adhesion. Use a good quality brush to apply a uniform coat of primer-sealer to all surfaces to ensure a well-adhered top coat. Paint cabinet doors and drawer fronts, as well as separate pieces of wood or moldings. If these parts have raised or twisted features, make sure the paint is flowing into the cracks and corners, but don’t allow it to build up in these places. Take your time and paint comfortably.

FAQs:

Sandpaper, primer, paint, paint brushes, rollers, and protective gear such as gloves and a mask.

It depends on the current finish, but typically 2-3 coats are recommended, allowing proper drying time between coats.

Related Posts